Merits of an Aqueous Parts Cleaning System

Aqueous Based Systems

The alternative to Solvents is aqueous based systems, which use water or emulsions as a cleaning media. Emulsions are relatively simpler to handle, wash and recycle. But there are issues that are faced during the disposal of the emulsion waste when the media is to be cleaned.

All emulsions are categorised as water in oil or oil in water types. 

The emulsions are made of emulsifiers which have hydrophobic and hydrophilic ends.  When they are brought in contact with water, the hydrophobic end attaches itself to water molecule and the hydrophilic end is free and can easily attach itself to any oil, grease or similar contaminant. This helps in removal of the contaminant from the media or the substrate.

Emulsions are made by mixing water and the emulsifier under immense shear and pressure to create a colloidal solution that has a dispersion of emulsifiers in water. Emulsifiers have the same property as any hydrocarbon making it an ideal compound to be used in the cleaning. The emulsions are  also made of stabilisers, buffers and other chelating agents.

There are many advantages of using Emulsions. Temperature of washing can be increased and it can also be operated in an open system. It’s also compatible with most metals, non-metals, plastics and alloys. Most emulsions are stable over a wide range of ph, temperatures and can accommodate additives needed in the washing process.

However emulsions need a process of rinsing and subsequent drying. The rinsing is compulsory as we need to remove the detergents and soap remains from the component. This process is not required when dealing with a solvent based system.

A typical aqueous cleaner is 3 stage:  

1) Washing

2) Rinsing

3) Drying.

Most aqueous cleaning agents are made of various compounds to accommodate different processes.  They can incorporate Chelating agents, sequestering agents, anti-rust compounds, anticoagulants, buffers, stabilizers and other such compounds. These Chemistries are detailed in a different book.

 In summation it can be said that most metals clean and dry faster in solvent based systems, but we need to study the economics of using the solvent must be studied in detail. Aqueous technologies are safer, healthier and less expensive too.

Both Methods have disposal issues.  There is a change in the mind-set of existing users who are moving towards thee aqueous based solutions. Class 1 level of washing needs be augmented with a newer generation of chemicals.